EN 10088-3 1.4005 X12CrS13 AISI416 BS 416S21 JIS 416 AFNOR Z11CF13 DIN 17440 1.4005 SIS 2380 shaft material corrosion resistance low mechanical properties average forgeability poor weldability with care machinability good ferromagnetic grade density (kg/dm3) 7.70 electrical resistivity at 20 °C ( mm2/m) 0.60 magnetizability possible 1.4016, X6Cr17, AISI 430, Z8C17 - stainless steelSpecifications and applications of steel. Chromium stainless steel with ferritic structure resistant to basic corrosive environments and to some chemicals in low concentrations. The steel is resistant to water,
This standard BS EN 10088-1:2014 Stainless steels is classified in these ICS categories:77.140.20 Stainless steels. This European Standard lists the chemical composition of stainless steels, which are subdivided in accordance with their main properties into corrosion resisting steels, heat resisting steels and creep resisting steels and specified in the European Standards given in Table 1. BS EN 10088-2:2014 Stainless steels Technical delivery Homepage>BS Standards>77 METALLURGY>77.140 Iron and steel products>77.140.20 Stainless steels> BS EN 10088-2:2014 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes CEN - EN 10088-2 - Stainless steels - Part 2:Technical Find the most up-to-date version of EN 10088-2 at Engineering360. scope:This European Standard specifies the technical delivery conditions for hot or cold rolled sheet/plate and strip of standard grades and special grades of corrosion resisting stainless steels for general purposes.
1. Identification code of the product-type 1.4003 EN 10088-4:2009 2. Type 1.4003 3. Product Cold Rolled Strip & Sheet of Corrosion Resisting Steel 4. Intended use Building Construction or Civil Engineering 5. The Notified Body:has conducted the first inspection and continuous surveillance according to the system:and issued the certificate: DECLARATION OF PERFORMANCE AND CONFORMITY:1. Identification code of the product-type 1.4401 EN 10088-4:2009 2. Type 1.4401 3. Product Cold Rolled Strip & Sheet of Corrosion Resisting Steel 4. Intended use Building Construction or Civil Engineering 5. The Notified Body:has conducted the first inspection and continuous surveillance according to the system:and issued the certificate: EN 10088-1 Grade X2CrNiMo17-12-2 strain-hardened Material X2CrNiMo17-12-2 is comparable to X 2 CrNiMo 17 13 2 acc. to DIN17440 :1985-07. It is a modification of steel 1.4401 with high resistance to non oxidizing acids and chloride containing media. This steel is suitable for mirror finishing and very good cold formable. Its corrosion properties are still improved owing to the lowered C-content.
EN 10088-2:2005 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes. You can compare properties of the 2 grades The contents from this Steel & Alloy Database may not be reproduced. Stainless Steel - Austenitic - 1.4301 (304) Sheet and Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel. Stainless Steel - Ferritic - 1.4003 (3CR12) Sheet and Plate1.4003 (3CR12) Sheet and Plate. Type 1.4003 stainless steel is a utility ferritic stainless steel, often used in place of mild steel. It offers the benefits of more highly alloyed stainless steels such as strength, corrosion and abrasion resistance, durability and low maintenance.
BS EN 10088-2:2005 Technical delivery conditions for sheet/plate and strip for general purposes (replaces BS1449 Part 2) BS EN 10088-3:2005 - Technical delivery conditions for semi finished products, bars, rods, and sections and bright products of corrosion resisting steels Stainless steelsEN 10088-1:2005 (E) 6 Table 2 Chemical composition (cast analysis) a of ferritic corrosion resisting steels Steel designation % by mass Name Number C max. Si max. Mn max. P max. SN max. Cr Mo Nb Ni Ti Others X2CrNi12 1.4003 0,030 1,00 1,50 0,040 0,015 b 0,030 10,5 to 12,5 - - 0,30 to 1,00 - - UNE EN 10088-2:2015 Stainless steels - Part 2:Technical UNE EN 10088-2:2015 Stainless steels - Part 2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes Aceros inoxidables. Parte 2:Condiciones técnicas de suministro para chapas y bandas de acero resistentes a la corrosión para usos generales.
EN 10088-3:2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes. EN 10088-1:2005 Stainless steels. List of stainless steels. Equivalent grades:Go here. Chemical composition % of steel X12CrS13 (1.4005):EN 10088-3-2005. X2CrTi12 / 1.4512 - SteelNumber - Chemical composition 1.4512. Classification:Ferritic stainless steel. Density:7.7 g/cm ³. Standard:EN 10088-2:2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes. EN 10296-2:2005 Welded circular steel tubes for EN 10088-2 Chemical Composition Stainless SteelEN 10088-2 Chemical Composition Stainless Steel. EN 10088-2 is the material standard for stainless steel sheet, plate and strip for general purposes. A total of 83 stainless steel grades are listed, including 19 ferritic, 14 martensitic, 2 precipitation hardening, 40 austenitic and 8 austenitic-ferritic duplex grades. The chemical composition of these stainless steel are shown in this article.